California Proposition 65 requires businesses with 10 or more employees to give a clear and reasonable warning before knowingly exposing people in California to listed chemicals. For office furniture, the exposure routes are formaldehyde from composite wood, flame retardants in foam, and phthalates or lead in trim, and the duty often lands on the importer or brand owner.
What does Prop 65 actually require?
The Safe Drinking Water and Toxic Enforcement Act of 1986, administered by the Office of Environmental Health Hazard Assessment (OEHHA), sets two duties: no knowing and intentional exposure to a listed chemical without a clear and reasonable warning, and no discharge of listed chemicals into drinking water sources. The warning duty is the one that affects furniture.
Three features are easy to miss. It is a disclosure law, not a safety certification — there is no pre-market approval, no certificate and no registration, and a product with a warning is not banned. The chemical list runs past 1,000 substances and is updated, so a label written against a 2019 list may be out of date. And the duty follows the exposure rather than the supply chain, reaching manufacturers, distributors and retailers who do business in California, including online sales shipped to California customers.
Safe harbor warnings are optional but widely used, because a business that follows the model wording is deemed to comply. The regulations sit in Title 27 of the California Code of Regulations, Article 6.
Which chemicals in office furniture trigger warnings?
This is an illustrative list of the usual suspects, not a legal determination for a product. The obligation depends on the actual exposure and on the safe harbor level OEHHA publishes for each chemical.
| Chemical | Where it appears in furniture | Listed for | Evidence to request |
|---|---|---|---|
| Formaldehyde | Composite wood panels, adhesives, some fabrics and finishes | Cancer | CARB Phase 2 / TSCA Title VI panel documents, plus chamber emissions data if specified |
| TDCPP (chlorinated Tris) | Polyurethane foam in seating | Cancer | Written foam formulation declaration from the foam supplier |
| Toluene | Solvent-based adhesives, contact cement, some coatings | Reproductive harm | Adhesive SDS and a low-VOC or water-based adhesive specification |
| Phthalates such as DEHP and DINP | PVC edge banding, vinyl upholstery, cable jackets | Cancer and reproductive harm | Material declaration; a PVC-free option where the project requires it |
| Lead | Painted surfaces, brass hardware, PVC trim | Cancer and reproductive harm | Coating test reports and hardware material certificates |
Composite wood and foam drive most furniture exposure, so panel and foam documentation does the heaviest lifting in a supplier file. A supplier who says “no Prop 65 chemicals” is making a claim across a list of more than 1,000 substances — ask what testing or declarations support it.
What has to be on the label now?
The safe harbor regulations allow a long-form and a short-form warning. The long form, in substance: a yellow warning symbol, the word WARNING, a statement that the product can expose you to chemicals including a named chemical known to the State of California to cause cancer or birth defects or other reproductive harm, and a direction to www.P65Warnings.ca.gov.
The short form changed. Amendments approved in December 2024 took effect January 1, 2025 and require short-form warnings to name at least one chemical for each applicable endpoint — cancer and reproductive harm — which the old short form did not. Products manufactured on or after January 1, 2028 must use the new language; products labeled before that date under the old short form may continue to be sold. The amendments also allow “CA WARNING” or “CALIFORNIA WARNING” alongside “WARNING”, and require short-form text to be at least 6-point and conspicuous.
| Warning method | Where it goes | Typical use | Practical note |
|---|---|---|---|
| Product label or labeling | On the product, packaging or attached labeling | Retail, e-commerce shipments | Must be conspicuous and match the actual exposure |
| Retail signage | Sign at the point of display or sale | Dealer showrooms | Customer must see it before purchase |
| Internet | The product display page | Online sales into California | Retailers get 60 days after written notice from the manufacturer during the transition |
| Notice to a downstream business | Written notice with acknowledgment of receipt | B2B and contract projects | Keep the signed acknowledgment on file |
Who is liable when the factory is overseas?
The duty attaches to the business that causes the exposure in California, which in practice is often the brand owner or importer rather than the factory. A distributor or dealer can also receive a notice, because it sold the product.
Enforcement comes from the California Attorney General, district attorneys, city attorneys in cities over 750,000 and, most often, private enforcers who send a 60-day notice of violation and sue if the issue is unresolved. Civil penalties can reach up to $2,500 per violation per day, and settlements commonly require warning changes, reformulation or both. An indemnity clause from a Chinese factory is worth having, but it does not remove the statutory duty, and the label on the carton still has to be right.
How do you decide whether a warning is needed?
Prop 65 does not require testing. It requires a clear and reasonable warning before a known exposure above the applicable safe harbor level. OEHHA publishes no-significant-risk levels (NSRLs) for cancer and maximum allowable dose levels (MADLs) for reproductive toxicity, and exposure below those levels does not need a warning.
A workable process: list the components (panel, foam, fabric, edge banding, coating, hardware); map each to candidate listed chemicals; collect supplier declarations and test data; estimate exposure against the current NSRL or MADL for the relevant route — inhalation for emissions, dermal for handling; then reformulate, warn, or document why no warning is needed. The last step is what protects a business in a notice: a file showing the assessment, the data and the decision is stronger than a label alone, and stronger than a supplier’s assurance.
What documents should a buyer require?
- Component-level chemical declaration covering panel, foam, fabric, edge banding, coating and hardware.
- Panel formaldehyde documentation — CARB Phase 2 and TSCA Title VI, the US regulatory requirements for composite wood, which are separate from Prop 65.
- Emissions or content test data where the specification sets a limit, such as GREENGUARD or BIFMA X7.1 results.
- A written warning decision — either approved artwork naming the chemical, or the documented rationale for no warning.
- Change notification, indemnity and records retention clauses covering the period the product is sold.
FAQ
Does Prop 65 apply to furniture sold online to California customers?
Yes. A sale shipped into California is a sale in California for these purposes, and the warning can go on the product display page or on the labeling.
Is a Prop 65 warning an admission that the product is unsafe?
No. It discloses that the product can expose users to a listed chemical above the applicable safe harbor level. Many businesses warn rather than reformulate, and a warning is not a recall or a finding of liability.
Do all office chairs need a Prop 65 warning?
No. It depends on the foam, fabric and trim, and on whether exposure exceeds the safe harbor level. Seating with polyurethane foam or PVC is more likely to need a warning or a reformulated material, but the decision should follow the assessment, not a rule of thumb.
What changed about short-form warnings?
Since January 1, 2025, the new short form must name at least one chemical for each applicable endpoint. Products manufactured on or after January 1, 2028 must use it to rely on safe harbor protection; earlier labels can continue to be sold.
Can we use the factory’s warning label on our own brand?
Not automatically. If your brand appears on the product, the warning has to be clear and reasonable for the exposure your product causes. Review the wording and the chemical named against your own component data.
What are the penalties for getting it wrong?
Civil penalties can reach up to $2,500 per violation per day, and private enforcers can act after a 60-day notice. The larger cost is usually settlement, relabeling and reformulation work.
Sources
- OEHHA, Proposition 65 chemical list (accessed November 4, 2026)
- OEHHA, Proposition 65 law and regulations (accessed November 4, 2026)
- OEHHA, Article 6 — Clear and Reasonable Warnings (accessed November 4, 2026)
- OEHHA, Final Statement of Reasons for the December 2024 short-form warning amendments (accessed November 4, 2026)
- California Prop 65 warnings site, furniture products fact sheet and sample furniture warnings (accessed November 4, 2026)
- US EPA, formaldehyde and TSCA Title VI composite wood requirements (accessed November 4, 2026)
This article is general information about how Proposition 65 works and what buyers usually request. It is not legal advice, and it does not assess any specific product. Warning obligations, safe harbor levels and label content depend on the facts of each product and on the current regulations, so confirm the position with qualified California counsel or OEHHA before finalizing labels or contract language.
Wenyi’s desk and workstation range can be specified with CARB P2 / TSCA Title VI panels, and our certifications page lists the schemes we work to. If you need the chemical and panel documentation behind a California order, send the requirement to our team with the models in scope.
Last updated: November 2026

